TYROLIT Hydrostress DZ-S2, Руководство по эксплуатации

Страница: 10 / 16

TYROLIT Hydrostress AG
Page 10 Wall saw DZ-S2
Servicing and maintenance
Lubricate lock unit
1 Grease nipple

11
4
Maintenance and servicing table
Bef
or
e e
ver
y
commissioning A
t end of w
or
k
W
eek
ly
Year
ly
A
ft
er faults
A
ft
er damage
Wall saw Retighten loose bolts, screws and nuts
(refer to the tightening torque speci-
fications) 
X X X
Prism guides Check for wear 
X
Replace before the anchoring screws
of the guide prisms touch the rail or
the chassis touches the rail

X
Y-guides Apply 2-3 applications of grease to
the lubricating nipples 
X
Couplings Check for leak-tightness and damage
and replace as required 
X
Swivel arm Clean with water 
X
Check the saw blade uptake for wear 
X X X
Feed motor Check cleanliness and leak-tightness

X X X X
Drive motor Check cleanliness and leak-tightness 
X X X X
Water economy Check water line for cleanliness and
leak-tightness 
X X X
Blow out water 
X
Saw blade Clean with water

X
Check for wear 
X X X X
Service To be performed by TYROLIT Hydros-
tress AG or an authorised workshop  After 100 / 300 / 500 / 700 hours
4.1