Before Starting Work
Switching soft impact feature on and off
(Figure 2 and Figure 3)
Attention!
Only press the soft impact feature ON / OFF changeover switch if the power tool is
switched off.
Figure 2
Figure 3
Switch the drill's soft impact feature on or off, depending on the material to be drilled
(Figure 2 and Figure 3).
Drilling with soft impact:
Concrete and other hard materials.
Drilling without soft impact feature: abrasive materials and materials with low hardness.
• Switch on soft impact feature: Pull the diamond dry core bit towards the front and hold
tight. Press the side of the soft impact switch marked
green (1) (Figure 2).
• Switch off soft impact feature: Pull the diamond dry core bit towards the front and hold
tight. Press the side of the soft impact switch marked
black (2) (Figure 3).
•
Danger!
Risk of fire if cable drums used.
► If cable drums are used, ensure the cable is completely unwound. The rolled up
cable can heat up and start to burn.
17
