Tyrepal TC215, Руководство пользователя, Страница: 8 / 16

TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: enquiries@tyrepal.com www.tyrepal.co.uk
© TyrePal Ltd 2013 TC215E 20130319
8
4.4 Set units of pressure and alert levels
This procedure automatically moves on to the next setting as you set the display units,
high and low pressure alert levels and temperature alert level. Pressure alerts are set
individually for each of the three axles on the towing vehicle (tractor) while the trailer
settings apply to all axles on the trailer. The temperature alert level applies to all tyres.
1. In standby mode, press and hold the
SET
button for 3 seconds. Release after the
beep. Press the
SET
button repeatedly to scroll through the different settings and
press the
+
or
–
buttons to adjust the setting as follows:
2.
Pressure units:
while the PSI or BAR
icon is flashing, press the
+
or
–
button
to select the desired units. Then press
SET
to move on to set temperature units.
3.
Temperature units:
while the °C or ˚F
is flashing, press the
+
or
–
buttons to
select and press
SET
again to move on to
set the high pressure alert level for the
first axle.
4.
First axle pressure alert levels:
Press + or – to adjust the setting, then
press
SET
to move on to set the low
pressure alert for this axle.
Please note: The factory set low pressure
alert level is 100psi.
If you want a lower level,
set the low pressure alert levels first, then cycle
though again to set the high pressure alerts, as the system will not allow the high pressure
alert to be less than the low pressure alert.
5.
Continue to cycle through high and low pressure settings for the three axles on
the tractor unit and all three axles on the trailer.
6.
High temperature alert for all wheels:
Press + or – to adjust the setting as
required. The factory setting of 70°C is suitable for most applications.
7. Press and hold the
SET
button for three seconds to save the settings and exit the
settings mode. If no action is taken for 1 minute, the system will return to standby
mode without making any changes.
The alert levels can be adjusted at any time using this procedure, for example if different
pressures are required when not towing a trailer. The new settings take immediate effect.