CALIBRATION
When the 'Point to fly' function does not work properly,
please calibrate the TYPHOON Wizard as follows:
STEP 1) Entering the TYPHOON Wizard calibration mode
Press and hold both the Descend/ Backward Button and the
Power Button at the same time for around 2 seconds till the
top right Aircraft Status LED is solid pink. After that you can
release both buttons. If entering the calibration mode fails,
turn off the TYPHOON Wizard and try again.
STEP 2) Wizard Calibration
Immediately move the TYPHOON Wizard in the “∞“ form
while slowly spinning in a circle. When the calibration is
done, Wizard will turn off automatically. The process will
take around 30 seconds.
IMPORTANT NOTE: If calibration fails, the top left Aircraft
Mode LED will be solid red and the power LED will blink red
rapidly. You should turn off the Wizard and repeat the
process from Step1.
TIPS: Keep distance from magnetic interference during the
calibration. We recommend calibrating Wizard outdoors.
You can find the TYPHOON Wizard calibration tutorial video
at www.yuneec.com/wiz-info.html
Press and hold both
together for around
2 seconds
Aircraft Status LED
turns to solid pink
The “∞“ form
Slowly spinning in a circle
