TYPHOON Adly 100 cc, Руководство пользователя

Страница: 26 / 28

26
5.
Set the handle bar into the lock-pin of the steering base. Tie-up the 4
hex-socket bolts. Install the rear cover into handle bar and adjust the
cables and wires properly. Install the front cover into the rear cover.
6.
Pull the seat-lock cable and remove the seat. Install the battery with
the red wire to positive (+) and the black wire to the negative (-).
7.
Remove the oil tank cap and fill with 2 stroke injection oil of a synthetic
and low-smoke type, and enough unleaded gasoline to operate. Be
sure the arrow mark on the fuel valve arm
（
petcock
）
is set into the
correct position.(on).
8. Turn on the main switch and try to start-up the engine. In order to use
the electric starter, you need to check the following:
A. Turn on the engine operation switch located on left handle bar
B
Pull the rear-brake lever
C. Press the electric starter bottom to start.
9.
If the vehicle is operating in a very dusty area, please add more oil on
the air cleaner filter.