TYPHOON TV/FM PCI Capture Card
Article number: 50575
3.6. Settings for Sound Card Owners
To do so, proceed as follows:
1. Double-click the volume control icon illustrated as a speaker on the taskbar.
2. Be sure that the “Mute” option under the “Line-In” slider is not checked and that the
“Line-In” slider is not at the bottom of its range. This makes sure you will be able to
hear the tone of the TV signal through your system and control the volume. Other
settings are required for recording (see instructions below):
3. Select the “Options\Properties” menu item.
4. Set the “Adjust volume for” option to “Recording”. Confirm your choice by clicking
“OK”.
5. Now enable the check box below the Line-In slider and move the slider itself to its
middle position. By checking the check box, you define the Line-In input of your
sound card as a recording input source. These is essential if you want to record a
video sequence with sound and want to use the sound card input to do so.
This completes the configuration of the sound card settings and you can now close the
soundcard mixer!
With the
TV/FM PCI Capture Card
, the above settings are not necessary.
By choosing
None
in the Audio Settings the Audio will be transmitted internally. See
Chapter 6.6
Version 1.5
All specifications are subject to changes without further notice
10
