6
1) INSTALLING THE LIGHT BAR
INSTALLATION GUIDE
Hardware:
• Universal Mounting Brackets A or B
• 2 sets of M6 Screw with Nut, Spring Washer and Flat Washer
• 2 sets of M6 Screw with Spring Washer and Flat Washer
Tools Required:
• Power Drill and 15/64 in (6mm) Drill Bit (not included)
• Wrench (not included)
• Allen key
• Attach the Universal Mounting Brackets to A or B to the Light Bar and secure with M6 Screw, Spring
Washer and Flat Washer. Tighten the screw with Allen key.
• Choose a suitable mounting location for the Light Bar, preferably on the front bumper. Make sure the
location is strong enough to hold the Light Bar.
• Mark two holes for the Universal Mounting Brackets for a precise installation. Make sure nothing
beneath will be damaged after the holes are drilled.
• Drill the holes with a 15/64 inch (6mm) Drill Bit.
• Mount the Light Bar with the provided hardware.
• You can adjust the Light Bar’s beam angle by loosening the M6 Screw. Be sure not to over-tighten the
screw after the adjustment.
NOTE: INSTALL LIGHT BAR ON METAL OR DURABLE MATERIALS ONLY.
Universal Mounting Bracket B
Universal Mounting Bracket A
Universal Mounting
Bracket A
M6 Screw
M6 Screw
Universal
Mounting Bracket B
Spring Washer
Spring Washer
Flat Washer
Flat Washer
