16
Issue
Cause
Remedy
Cannot jump start
Wrong clamp
connection
Make sure to clamp the RED jumper cable to the
POSITIVE (+) post on the car battery. And BLACK
jumper cable to NEGATIVE (-) post or car interior.
Refer to Page 6 for details.
90-Second timer to
jump start has expired.
Jump starter timed out. Disconnect the cables from the
vehicle battery and reconnect.
Low battery status
Recharge the unit via USB cable until at least 50%
charge.
LED light on the clamp box
keeps flashing
Protection circuit is
working
Refer to the status table on the indicator box or page
8 of the manual.
The wireless charging
feature does not charge
my smartphone.
Your smartphone
cannot detect the
wireless charging pad
signal.
Adjust your device on the wireless charging pad until
it starts charging.
If your smartphone has a case thicker than 0.3 mm,
you may need to remove the case in order to charge
your smartphone wirelessly.
Your device does not
offer wireless charging
feature.
The device you are charging must have the wireless
charging feature in order to use the wireless charging
pad.
Flashlight does not turn on
Low battery
Recharge the unit via USB cable.
The unit is charging
As a safety precaution, the flashlight light will not work
while the unit is charging. Please unplug the unit from
charging or wait until the unit finishes charging before
using the light.
No wall adaptor
Charge via USB cable
Plug the USB cable into computer or any USB 5V 2A
wall adaptor.
TROUBLESHOOTING:
ML-530013_V1
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
1.866.294.9244 | [email protected]
©2020 TYPE S. All rights reserved.
www.typesauto.com
WARNING:
This Jump Starter is only intended to jump start 12V cars, trucks, boats, or
motorcycles with an internal combustion engine and single lead-acid battery systems.
Do not use this device to jump start batteries outside of these four types of vehicles;
doing so may cause a fire or other serious injuries. Refer to the user manual for
additional safety information.
