14
WARNING: A failure to read and follow these warnings and instructions may result in a serious
accident, including damaged property or a serious injury, including loss of life.
• The Wireless Backup Camera is designed as an aid to the driver in detecting large stationary
objects to help avoid damaging the vehicle. However, you, the driver, must use it safely and
properly. Use of the Wireless Backup Camera is not a substitute for safe, proper and legal driving.
• Never back up while looking only at the screen. You should always check behind and around
the vehicle when backing up just as you would if the vehicle did not have the Wireless Backup
Camera. Always make sure your intended path is clear. If you back up while looking only at the
Monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in injury or
death. Always back up slowly.
• Never depend on the Wireless Backup Camera entirely when backing up. The image on the screen
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions of
car charger for Model BT530033.
2. Before using the product, read all instructions and cautionary markings.
3. Do not expose car charger to rain, moisture, or snow.
4. Use of an attachment not recommended or sold by the product manufacturer may result in a risk
of fire, electric shock, or injury to persons.
5. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter
connector rather than cord when disconnecting car charger.
6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
7. Do not operate car charger with damaged cord or cigarette lighter connector – replace it
immediately.
8. Do not operate car charger if it has received a sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified serviceperson.
9. Do not disassemble car charger; take it to a qualified serviceperson when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
10. To reduce risk of electric shock, unplug charger before attempting any maintenance or cleaning.
Turning off controls will not reduce this risk.
7. SAFETY INFORMATION