Tynetec Altec Response, Руководство по установке, Страница: 8 / 12

Doc No. FM0548 issue B Page 8
9. VIEW SYSTEM LOG
Details of the last 128 alarm calls are stored in memory.
From the Main Menu display scroll down to

System Log

and press the ENTER key.
Main Menu V1.00A

Radio Devices
Audio Setup
 System Log 
The display will show details of the last alarm call, see example below;
System Log 004 Exit

Smoke Alarm
Room 000010
 Hallway 
Use the
 
keys to scroll back/forward to view previous alarms.
Press the

key to exit the mode.
10. LOAD DEFAULTS
From the Main Menu display scroll down to

Load Defaults

and press the ENTER key.
Main Menu V1.00A

 Load Defaults 
Create Sensor
Exit
The display will show the Load Defaults options;
Load Defaults

 System Defaults
X

Radio Defaults X
Log Defaults
X
Scroll down past

Log Defaults

and the display will change to;
Load Defaults

 Sensor Defaults X 
Power Off
X
Apply
Select the “Defaults” you want to load then press the
 
keys to set on “

” or off “
X
”.

System Defaults

clears all programming from memory

Radio Defaults

clears all radio devices from memory
 Log Defaults 
clears all alarm call history from memory

Sensor Defaults

clears all custom sensors from memory (see section 13)

Power Off

Turns the Altec Response unit off (see section 12)
Multiple defaults can chosen with a “

” and applied simultaneously.
Press the

key to select
 Apply 
then press the ENTER key.
This will also exit the menu.