Tymate M12-3, Руководство пользователя

Страница: 6 / 16

3.3 Turn on/off the Monitor
4.1 Factory Settings
4.2 Restore Factory Settings
When parking for a long time, the user can manually turn off/on the display. In the off state,
press and hold the "-" key, the monitor turns on after a beep sound. In the power-on state,
press and hold the "-" key, the monitor turns off after a beep sound. When the battery is
low, the display will automatically turn off.
In the standby mode, press and hold the "SET" button on the display, release after the
first beep sound, the display will enter the first setting interface. When the corresponding
LCD symbol flashes, you can select the parameter item by pressing the "SET" key. Press
"-" or "+" to set specific parameter values. After the setting is completed, press and hold
the "SET" button and release after you hear a beep sound. In this way you can save the
parameters and exit to the normal standby state. When entering the setting state, press
"SET” and "+" at the same time to exit the setting mode without saving the setting data. If
there is no operation within 1 minute in the setting state, the system will automatically exit
the setting mode and return to the normal standby state.
Turn off the display first, then press and hold the "-" button to turn it on. Then the
full-screen display page appears. Press and hold the "SET" button within 3 seconds and
release after you hear a beep sound, indicating that the factory settings are restored
successfully.
4. Parameter Settings
Pressure unit BAR/PSI
Low pressure alarm value
Temperature unit
High temperature alarm value 158
o
F
o
F
High voltage alarm value