TYM T474 Скачать руководство пользователя страница 111

Страница: 111 / 175

5 - 13

Maintenance and service

435

7. checking and cleaning air cleaner

Check and clean the air cleaner ac-

cording to the following instructions:

< cautions for inspection and

service of air cleaner >

(1) Use the standard element and fil-

ter and do not apply oil on them.

() Remove any dust in the cover

thoroughly.

(3) Install it firmly so that dust does

not enter below the cover.

(4) Never drive with the element and

filter removed.

Do not hit the element with

a rock or concrete during its

cleaning.
Make sure to install the element

firmly.
Tighten each part of the air

cleaner securely to block dust

completely.

•

nOte

vacuuM valve cleaning

Pull out the valve with a hand and

remove dust from its inside. If it

is dirty or watery, wipe it with a

dry rag thoroughly before fitting it

again.

►

•

air cleaner cleaning

①

Blow compressed air from the

inside toward the outside of the el-

ement. Keep proper distance be-

tween the air nozzle and element.

air cleaner replacing

After cleaning the element 5 times

or if it is damaged, replace it with a

new one.

►

T4NO507A

Air cleaner body

Element

T474NH-영문-05(마).indd 13

2019-08-16 오전 11:30:39

Содержание T474
















































































































































































Результаты поиска

Содержание T474

Отзывы:

TYM T474, Руководство пользователя, Страница: 111 / 175

Результаты поиска

Содержание T474

Отзывы: