TYM T454HST Скачать руководство пользователя страница 61

Страница: 61 / 145

Avoid damage! To prevent transmission damage:

1.Depress clutch pedal and stop machine motion completely before shifting the main shift & reverse lever

(changing direction forward and reverse ).

2.While operating machine, always depress clutch pedal and stop machine motion before changing travel gears.

3.Never rest a foot on the clutch pedal while machine is in motion.

important

►

SUB GEAR LEVER (RANGE SHIFT LEVER)

Operate the sub gear lever using clutch to select the appropriate speed for different
applications.

It is located on the LHS of driver seat.

Sub gear lever (range shift lever)

Sub gear lever

►

DIFF-LOCK PEDAL

In case of wheel slippage use the diff-lock by pushing down on the diff lock pedal.

To release it remove the foot from the pedal.

Diff-Lock pedal

Tractor will be difficult to turn if the Diff-lock is engaged, ensure the lock
is disengaged before turning the steering wheel.

Danger

Содержание T454HST


















































































































































Результаты поиска

Содержание T454HST

Отзывы:

Бренды по названию

Популярные бренды

TYM T454HST, Руководство оператора

Результаты поиска

Содержание T454HST

Отзывы:

Бренды по названию

Популярные бренды