background image

DO

S AND DON

T

DO’S-For Better performance

DO 

 

Ensure that safety shields are in place and in good condition.

y

p

g

DO 

Read all operating instructions before commencing to operate Tractor.

DO 

Carry out all maintenance tasks without fail.

DO 

Keep the air cleaner clean.

DO 

Ensure that the correct grade of lubricating oils is used and that they are replenished and 

changed at the recommended intervals.

DO 

 

Fit new sealing rings when the filter elements are changed.

DO 

Watch the oil pressure gauge or warning light and investigate any abnormality immediately.

DO 

Keep the radiator filled with clean water and in cold weather use anti-freeze mixture.         

Drain  the system only in an emergency and fill before starting the engine.

y

y

g

y

g

g

DO 

Ensure that the transmission is in neutral before starting the engine.

DO 

Keep all fuel in clean storage and use a filter when filling the tank.

DO 

Attend to minor adjustments and repairs as soon as necessity is apparent.

DO 

Allow the engine to cool before removing the radiator filler cap and adding water, remove 

the radiator cap slowly.

DO 

Shift into low gear when driving down steeps hills.

DO 

Latch the brake pedals together when driving on a highway.

DO 

Keep draft control lever fully down when not in use.

Don’ts-For safe operation 

DON’T 

Run the engine with the air cleaner disconnected.

DON’T 

Start the tractor in an enclosed building unless the doors and windows are open for proper 

ventilation.

DON’T 

Operate the tractor or engine while lubricating or cleaning.

DON’T 

Allow the tractor to run out of diesel fuel otherwise it will be necessary to vent the system.

DON’T 

Temper the fuel injection pump, If seal is broken the warranty becomes void.

DON’T 

Allow the engine to run idle for a long period.

17

DON’T 

Run the engine if it is not firing on all cylinders.

Содержание T293HST

































































































Отзывы: