71-0145
Page 8
07/29/18
Rev. 01
Step 9.
Remove heater mounting plate from the back of the heater. With the 1” screws provided
with the heater, fasten the heater mounting plate to the wood brackets. The upper left screw
(closest to the wall) should be 5” from the wall and 24-3/4” from the floor. Then put the two
lower screws in the holes. Then hang the heater on the heater mounting plate.
After mounting the heater, connect the large wire from the sauna heater to the blue connector on
the back wall. Connect the smaller wire from the heater to the right side wall.
Step 10.
Ensure all connections are completed. Plug the cord from the back of your room to a
15 or 20 amp 120 volt dedicated outlet.
