Tyler AS-350, Руководство по установке

Страница: 6 / 26

Using the ASTAR BELLYPAN TEMPLATE & TOOLS, and following the
additional instructions on the template...
• Mark and cut out a slot to allow the AIRFRAME BRACKET to protrude.
• Mark and cut out a hole for routing the camera mount cables.
Note: Typically the slot and hole modification is only done to the left side (as
shown). However, this modification may also be done to the right side of the
BELLYPAN (if necessary).
Picture:
• Hand Saw
• 1-1/4” Hole Saw
• 2” Hole Saw
Page 3 of 10