3/5
Loosen but do not remove the hex bolt from the bottom of the
frame, (Figs 1 & 5). Select the driver/left Support Bracket, (Fig 4).
Insert the slotted end of the Bracket under the hex bolt.
a.
On models with tow hooks, slide the Bracket between the head
of the hex bolt and the large flat washer, (Fig 5). Do not tighten
hex bolt at this time
b.
On models without tow hooks, slide the Bracket between the
steel sleeve on the frame and the head of the hex bolt, (Figs 1 &
4).
STEP 4
(Fig 5) Models with tow hook, loosen rear bolt (arrow)
and slide top of Support Bracket between head of bolt
and large flat washer-no spacer required
Front
Loosen but do not
remove hex bolt
Front
8mm x 30mm Hex Bolt
(2) 8mm Flat Washers
8mm Lock Washer
8mm Hex Nut
(Fig 4) Driver/left Support Bracket
(model w/o tow hook illustrated)
(2) 8mm x 30mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
Front
(Fig 6) Attach Tube Bracket to end of Tyger Guard
Line up the lower end of the Support Bracket with the slot in the
Frame Bracket. Attach the Support Bracket to the Frame Bracket
with (1) 8mm x 30mm Hex Bolt, (2) 8mm Flat Washers, (1) 8mm
Lock Washer and (1) 8mm Hex Nut, (Fig 4).
STEP 5
Repeat Steps 2-5 to install the passenger/right Frame and Sup-
port Bracket.
STEP 6
Next, select (1) Tube Mounting Bracket, (Fig 6). Attach the Bracket
to the end of the Tyger Guard with (2) 8mm x 30mm Hex Bolts, (2)
8mm Lock Washers and (2) 8mm Flat Washers. Leave hardware
loose at this time. Repeat this Step to install the passenger side
Tube Bracket.
STEP 7
Customer Support: www.TygerAuto.com/Contact
