3/7
Customer Support: www.TygerAuto.com/Contact
Remove the license plate. Remove hardware attaching the plastic
cover on bottom of bumper, (Fig 5). Next, temporarily remove both
tow hooks, (if equipped).
STEP 4
Place blocks or jack stands under the front bumper to support it
during mounting bolt removal. Once the bumper has been
supported, remove the factory hex nuts attaching the inner
bumper bracket to the end of the frame, (Fig 6).
WARNING!
Assistance is required to hold the bumper in place
during hardware removal to prevent the bumper from falling.
STEP 5
With assistance, remove the bumper and move to a flat stable
surface, (Fig 7).
STEP 6
Front
(Fig 5) Remove hardware attaching plastic cover
on bottom of bumper to cross member (arrows)
Remove both tow hooks
(Fig 6) Remove hex nuts attaching bumper
brackets to end of frame. Passenger side
bumper bracket pictured from below
(Fig 7) Driver/Left mounting location
