TYG LSA22BC08, Руководство пользователя, Страница: 8 / 16

Installation Instruction
2.LSA22BC08 can be installed as Picture 4 with the hexagonal annular frame.
Installation Guide Map 1
Installation Instructions
2. When the speakers are used as floor monitors, please put the
foot plate at the bottom of the U shape stand, and adjust them
into ''+'' vertical position with the U shape stand. After this,
fasten the adjuster knob on the U shape stand. See Picture 2.
1. LSA22BC08 speaker can be installed in vertical or
horizontal way according to the applications, plus,
the installation angle can also adjusted. There are
many holes on the side round board of the speaker,
which are for the angle adjustment. Please loose the
adjuster knob before using, and then set the speaker
body to the position in need. The holes on the round
side board and on the U shape stand should be
concentric, and put the pins into the holes to fasten.
Then fasten the adjuster knob on both sides. See Picture 1.
Installation Guide Map -2
Wall
Picture 3
1.LSA22BC08 can be installed as Picture 3 with the vertical frame
Picture 1
Installation Instructions
P6
Picture 4
Active Speaker System
Picture 2
Notices:
1. The matched accessories are tested
and have the capacity to carry the
speaker, please be assured of them.
However, regarding to the ceiling or
wall and other installation places,
please think over about their capacities,
and you'd better consult the professional
technicians before installation.
2. Please put the slider bar of the pins
totally before inserting and drawing.