Chapter 12.0 Regulatory Statements
12.0 Regulatory Statements
EN50131 Compliance Statement
This product meets the requirements of Class II, Grade 2 equipment as per EN50131-1:
2006+A1:2009, EN50131-3:2009, EN50131-6:2008+A1:2017 (Type A), EN50136-1-1:1997,
EN50136-2-1, EN50136-2-3 (ATS2) Standards. This device is suitable for use in systems with the
following notification options.
-A (use of two warning devices and internal dialer required
-B (self-powered warning device and internal dialer required
-C (use of DSC compatible alternate communicator in back-up or redundant mode)
-D (use of DSC compatible alternate communicator with encryption enabled required.)
Note:
For EN50131 complian installations only the intrusion portion of the alarm system has been
investigated. Fire Alarm and Auxiliary (Medical) Alarm functions were not included in the eval-
uation of this product under the requirements of the above mentioned standards.
The model HS2128, HS2064, HS2032, HS2016 Control Panel has been certified by Telefication
according to EN50131-1:2006 +A1:2009, EN50131-3:2009, EN50131-6:2008 (Type A) and
EN50136-1:1997 (ATS2) for Grade 2, Class II.
EUROPEAN CE COMPLIANCE STATEMENT
This product is in conformity with the Electromagnetic Compatibility Directive 2014/30/EU, the
Low Voltage Directive 2014/35/EU, and the ROHS2 Directive 2011/65/EU.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Tyco Safety Products Canada Ltd declares that the radio equipment type is in compliance
with Directive 2014/53/EU. The full text of the EU declarations of conformity for the models men-
tioned below are available at the following internet addresses:
HS2LCDRF(P)(V)4: http://dsc.com/pdf/1401057
HS2LCDRF(P)(V)8: http://dsc.com/pdf/1401058
HS2LCDWF(P)(V)4: http://dsc.com/pdf/1401061
HS2LCDWF(P)(V)8: http://dsc.com/pdf/1401062
Frequency Band / Maximum Power
g1 433.04MHz – 434.79MHz/10mW
h1.4 868.0MHz – 868.6MHz/10mW
h1.5 868.7MHz – 869.2MHz/10mW
a3 119MHz – 135MHz - 66 dbµA/m @10m
European single point of contact: Tyco Safety Products, Voltaweg 20, 6101 XK Echt, Netherlands
UK Compliance Statement
In the UK this product is suitable for use in systems installed to conform to PD 6662:2014 at Grade
2 and environmental class 2 with the following notification options: A, B, C, D
Where HS2128/HS2064/HS2032/HS2016 is used with a single path signaling method (such as the
Integrated Digital Dialer), please note the following limitation:
IMPORTANT
Your attention is drawn to the fact that failure or compromise of single path signaling cannot be
passed to the police. While the failure persists, subsequent alarms cannot be notified to the alarm
receiving centre and passed to the police.
Setting Methods
The HS2128/HS2064/HS2032/HS2016 is capable to support the completion of the full setting pro-
cedure by the following methods:
a) push button switch, mounted outside the supervised premises; or
b) protective switch (i.e., door contact) fitted to the final exit door of the alarmed premises or area.
The setting procedure is a two-stage process of initiating the setting procedure within the supervised
premises (e.g., using Mini Prox Tag (MPT) or user code) followed by completion of setting by one
- 32 -
firealarmresources.com
