Access Codes
Access Codes
When Access Codes is selected from the Options menu, the keypad prompts for a Master Code. When a
valid Master Code is entered, a numeric keypad is displayed with arrows to scroll through the list of users.
Press the Select button to enter the user options.
Set Access Code:
adds/edits the 4-digit code
Set Partitions:
assigns the user to partitions
User Options:
enables/disables different options for the user
Delete User:
deletes the user from the system
The access codes have programmable attributes which allow zone bypassing, or one-time use activation.
Master Code (Access Code 01):
The master code, if programmed, can only be changed by the installer.
Supervisor Codes:
These codes can be used to program additional codes which have equal or lesser attrib-
utes. Once programmed, the supervisor codes receive the master code’s attributes. These attributes are change-
able. Any user code can be made a supervisor code by enabling User Code Attribute 1 (see the following for
details).
Duress Codes:
Duress codes are standard user codes that transmit the Duress Reporting Code when
entered to perform any function on the system. Any user code can be made a duress code by enabling User
Code Attribute 2 (see the following for details).
Note:
Duress codes are not valid when entering User Programming, Master Functions or Installer’s sections.
Note:
Access codes cannot be programmed as a duplicate or as a “Code +/- 1”.
Assign Proximity Tags
Proximity tags can perform any keypad function that would normally require a user access code. Present the
tag to the tag reader.
1.
Press [*][5]Master/Supervisor Code].
2.
Enter a 2-digit user code.
3.
Press 2.
4.
Pass the enrolled tag near the tag reader.
Delete Proximity Tags
To delete a proximity tag:
1.
Select Options, Access Codes [enter Master code].
2.
Select a user to delete.
3.
Select Prox Tag Prog then delete.
User Code Attributes
1.
The default attributes of a new code will be the attributes of the code used to enter User Pro-
gramming whether it is a new code or an existing code being programmed.
2.
System Master Code 01 has partition access for all partitions, as well as attributes 3-4 ON by
default.
Note:
These attributes are not changeable.
Inherent Attributes (all codes except installer and maintenance)
Arm/Disarm:
Any access code with partition access enabled will be valid for arming and disarming that
partition.
- 18 -
