manualshive.com logo in svg

Tyco Electronics p5400 series, Руководство оператора


Поделиться
Скачать
background image

MM-013994-001 

51

 

8.19.4 Nuisance 

Delete  

A group can also be deleted from the scan list, if it is not the currently selected group, by pressing the 

 

key (P7350 model) or the 

 key (P7370 model) during scan operation while the radio is displaying the 

unwanted group. The group will be deleted from the system's group scan list in the same manner as if 
done using the steps above. Deletions done in this manner will not remain deleted if the radio is powered 
OFF and then powered ON. 

8.20 SCANNING 

TRUNKED 

SYSTEMS 

The radio can be programmed using Radio Personality Manager (RPM) with the following System Scan 
features. Then these features are automatically enabled when the radio is powered ON. A key or menu 
option is also defined to allow the System Scan features to be toggled during radio operation. The System 
Scan state will be maintained through system changes but will default to ON when the radio is powered 
ON. 

Enable/Disable via Menu Selection 

Press 

 and then use the 

 or

 

 

buttons to scroll through the selections until 

SYS SCAN

 is 

displayed. Then press 

 to toggle the System Scan state. The 

SYSC ON

 or 

SYSC OFF

 display 

message is displayed for two seconds to show the new state. 

Enable/Disable via Pre-Programmed Keypad Key 

Press the key pre-programmed to toggle System Scan and the 

SYSC ON

 or 

SYSC OFF

 display message 

is displayed for two seconds to show the new state. 

8.20.1 

Wide Area System Scanning 

The P7300 series radio can be pre-programmed through RPM for Wide Area System Scan operation for 
roaming across mobile systems.  EDACS radio systems manage the radios assigned to the system via a 
control channel (CC).  Upon the loss of the currently selected system's control channel, radios can be 
programmed to automatically scan the control channels of other systems. If a new control channel is 
found, the radio will switch to the new system and sound an alert tone. 

8.20.2 

Priority System Scan 

The radio can also be pre-programmed for Priority System Scan.  The priority system is the desired or 
preferred system.  While receiving the control channel of the selected system, the radio will periodically 
leave the selected system and search for the control channel of the priority system.  This is done at a pre-
programmed rate defined by the value in the Priority Scan Time control, unless the ProScan

™

 algorithm is 

enabled, as explained in the following sections.  This priority scan timer is reset each time the PTT button 
is pressed or when the call is received.  If the priority system control channel is found, or meets the 
predefined criteria (ProScan), the radio will automatically switch to the priority system. 

8.20.2.1

 

Enabling the Wide Area System Scan Function 

If the radio cannot find the control channel of the selected system and begins to wide area system scan, 
the radio will only scan for the priority system control channel if the priority system is in the wide area 
scan list. 

 

Содержание p5400 series








































































































































Отзывы:

Нет отзывов

Похожие инструкции для p5400 series

Hama DIR3510SCBTX Quick Manual preview
DIR3510SCBTX
Бренд: Hama Страницы: 120
Denver Electronics TR-64 Instruction Manual preview
TR-64
Бренд: Denver Electronics Страницы: 14
Titan TG 7500D Owner'S Manual preview
TG 7500D
Бренд: Titan Страницы: 11
Vertex Standard EVX-5300 Service Manual preview
EVX-5300
Бренд: Vertex Standard Страницы: 31
Radio Shack 21-1711 Owner'S Manual preview
21-1711
Бренд: Radio Shack Страницы: 16
Audio Pro R-10RADIO ONE Owner'S Manual preview
R-10RADIO ONE
Бренд: Audio Pro Страницы: 53
Oricom UHF025 Quick Start Manual preview
UHF025
Бренд: Oricom Страницы: 6
Lloyd's LPD-902 Instruction Book preview
LPD-902
Бренд: Lloyd's Страницы: 24
PACH & COMPANY AeGIS Wiegand Installation Manual preview
AeGIS Wiegand
Бренд: PACH & COMPANY Страницы: 3
Sangean DDR-75BT Manual preview
DDR-75BT
Бренд: Sangean Страницы: 107
EFOY ProEnergyBox 4060P User Manual preview
ProEnergyBox 4060P
Бренд: EFOY Страницы: 40
Cobra UK 29 LTD ST Operating Instructions Manual preview
UK 29 LTD ST
Бренд: Cobra Страницы: 21
Midland SD-225U1 User Manual preview
SD-225U1
Бренд: Midland Страницы: 16
Midland BIZTALK MB400 Owner'S Manual preview
BIZTALK MB400
Бренд: Midland Страницы: 19
Harbor Freight Tools Predator 63966 User Manual preview
Predator 63966
Бренд: Harbor Freight Tools Страницы: 20
Philips PET741T Specifications preview
PET741T
Бренд: Philips Страницы: 2
Philips PET741R Specifications preview
PET741R
Бренд: Philips Страницы: 2
Philips PET741P Specifications preview
PET741P
Бренд: Philips Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды