Tyco Electronics M7100IP Series, Руководство оператора

Страница: 22 / 80

22
STO-ST9 The status 0-9 keys are used to send a pre-programmed status message to the
EDACS or P25 Trunked site.
PVT The PVT key enables or disables Private Mode for the System/Group displayed.
See the
Private Operation section.
KEY
Displays the Encrypted Keys. This selects the DISP KEY operation from the
menu functions.
G* This key function is used in Conventional Mode to send G-STAR emergency
signaling.
PA
This key function enables and disables the Public Address feature.
# DTMF keypad function.
1 thru 9
Keypad numbers.
*
DTMF Keypad function.
8.7.4 Primary Functions (Quick Access)
The secondary function of the
k
button is to toggle the keypad buttons between their primary
function and their secondary function. When the secondary keypad is active, i.e. entering phone
digits for an interconnect call, the
k
button can be used to toggle the keypad buttons back to
their primary function, perform a task (siren/light enable), and then toggle back to finish entering
the digits for the phone number.
PRIMARY
is displayed when the
k
button is used to
toggle the keypad keys back to their primary functions. This provides quick access to the primary
functions of the keypad. This is a programmable feature of the
k
button only. Careful
consideration should be given to possible operational conflicts before enabling this feature.
Several keys on the Scan version have a secondary function. The
m
key is the SELECT
secondary function with the
C
key remaining the same for the secondary function. On the
System version, the
o
has a secondary function for DELETE,
m
is SELECT, and
c
retains its CLEAR function.