MM102014V1, Rev. G
Table 4-3: Basic Menu Structure
Menu Name
Radio Displays
(top and bottom lines)
Usage Notes
To/From Dwell Display
▲
▼
registration, RF sync and
transceiver status codes
Engineering
Display
(Menu may not be avail-
able per programming.)
bit-error rates
and RSSI data
Displays radio system connection data.
For engineering use. See page 54.
▲
▼
OFF/ON
Silent Emergency
“
SilentEmerg
”
Use
◄
or
►
to toggle between OFF/ON.
Press Select to enable.
▲
▼
current latitude and
longitude (degrees:-
minutes:seconds)
GPS Fix
(e.g. GPS, Aged, Site)
“
GPS
”
Radio’s current GPS latitude and
longitude position scrolls across top line
of the display. Applies to GPS-equipped
radios only. See page 48.
▲
▼
User ID # of user currently
logged in
User ID
“
User ID
”
User’s identification/name scrolls across
top line of the display (if programmed).
▲
▼
Radio’s IP address
IP Address
“
IP Address
”
Radio’s Internet Protocol (IP) address
scrolls across top line of the display.
▲
▼
station’s call sign
Station
Identification
“
Station ID
”
Station’s identification/name scrolls
across top line of the display (if
programmed).
▲
▼
V-TAC operating mod
e
V-TAC Mode
(e.g., XCOV,
XCOV-TG, SOI)
“
Vmode Menu
”
Use
◄
or
►
to turn choose an available
V-TAC operating mode. See page 48.
▲
▼
V-TAC SOI channel
V-TAC Channels
(Menu appears only if in
SOI mode.)
“
Vchan Menu
”
Use
◄
or
►
to turn choose an available
V-TAC channel for Scene-Of-Incident
(SOI) mode communications. See pages
48 and 52.
▲
▼
available modes
Operating Mode
(e.g., OTP, OCF)
“
Mode Menu
”
Use
◄
or
►
to turn choose an available
mode. Press
Select
and confirm (Y/N)
with
◄
or
►
and
Select
again.
▲
▼
“OFF”
Stealth Mode
(blanks display when on)
“
StealthMenu
”
Use
◄
or
►
to turn on. Press any button
to turn it off. See page 23.
▲
▼
“LOW”, “MEDIUM”,
“MEDHIGH”, “HIGH”
Treble Level
“
Treble Menu
”
Use
◄
or
►
to choose speaker/headset
treble level. Press
Select
to return to
dwell display. See page 31.
▲
▼
“<< >>”
Display
Brightness “
Bright Menu
”
Use
◄
to dim and
►
to brighten
backlighting. Press
Select
to return to
dwell display. See page 23.
▲
▼
“OFF”, “LOW”, “MED”,
HIGH”
Side Tone Level
“
Side Menu
”
Use
◄
or
►
to choose side tone level.
Press
Select
to return to dwell display.
See page 24.
▲
▼
“ON” or “OFF”
Intercom
“
INTERCOM
”
Use
◄
or
►
to turn intercom on and off.
Press
Select
to return to dwell display.
See page 32.
▲
▼
selected channel
Selected Channel
(Menu may not be
available per radio
programming)
“
ChannelMenu
”
Displays the current channel. Press
Select
to return to dwell display.
▲
▼
See Next Page
20
