Wireless Access Point Model 0-1591700-x User Manual
Page 14 of 34
©2004 Tyco Electronics
Issue 3
System Menu
Administrator Settings
This menu specifies the password and remote management control of the access point. Set a
password to restrict management access to the access point via the web, console or Telnet
interfaces. Management of the access point can be restricted to a specific IP address if required.
Figure 9 - Administrator Settings Screen
Password Settings
To change the password, enter your current password in the
Current Password
box. Enter new
password in the
Password
box. Enter the new password again in the
Re-type password
box to
confirm it. Click
Apply
to complete the change.
The default user name is
admin
and the password is
iktpw
. See section 6 on page 11 for details.
Note that the user name cannot be changed from the web or console interfaces.
Idle Time Out
This is the period of inactivity before the access point will automatically close the Administrator
session for security reasons. The default value is 10 minutes. The available range is 1-99 minutes.
Remote Management
By default, the access point can be managed from any IP address in the network. This can
introduce security problems and it may be desirable to permit only a specific IP address to manage
the access point. Obtain the required value of static IP address from your network manager. This
remote management locking is enabled by clicking the
Enable
check box and then entering the
static IP address of the management platform. Note that if this option is selected, then no other IP
addresses can manage the access point.
