Page 17 / 18 ECOC: EGC0 ; LOC: AI
P/N 2-744014-3
411-18341 Rev.B
8 Changing the expendable parts
!!! NOTE !!!
For changing the expendable parts a hex socket head wrench with size 2,5 is supplied.
Contact positioner
In order to change the contact positioner the fillister-head screw needs to be removed. After that the
positioner can be removed and exchanged (see figure 8 and 9).
Figure 8
Figure 9
Crimper
The crimper is also fixed with a fillister-head screw. In order to take it out the pliers need to be opened
fully. After the screw has been removed the crimper can be drawn out to the front (see figure 10 and 11).
Figure 10
Figure 11
Anvil
The anvil too is fixed with a fillister-head screw which can only be reached with the pliers slightly
compressed. The screw is removed and the anvil drawn out (see figure 12 and 13).
