Tomcat i875P S5102
Chapter 3: BIOS Setup
3-17
http://www.tyan.com
3.7 – PnP/PCI Configurations
Options related to all the configurations of PnP / PCI resources.
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI / VGA Palette Snoop
PCI Device list
PCI1 INT Assignment
PCI2 INT Assignment
PCI3 INT Assignment
PCI4 INT Assignment
CNR LAN INT
Promise SATA INT Assignment
Intel i541 INT Assignment
[Disabled]
[Auto (ESCD)]
Press Enter
[Disabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Item Help
_________________________
Menu Level
►
Default is Disabled.
Select Enabled to
Reset Extended System
Configuration Data
ESCD> when you exit
Setup if you have
Installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
↑↓←→
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Reset Configuration Data:
This setting allow you to clear ESCD data.
Enabled / Disabled
Resources Controlled By:
Default whether system resources are controller by BIOS or by user.
Manual / Auto (ESCD)
PCI / VGA Palette Snoop:
Leave as default.
Enabled / Disabled
PCI 1 INT Assignment:
Default item to distribute IRQ to set Device.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
CNR LAN INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
PromiseSATA INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
Intel i541 INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15