TYAN TN71-BP012, Руководство по обслуживанию

Страница: 97 / 128

http://www.tyan.com
97

Only autoboot from a specific disk/network device:
Only boot options from a single device (specified here) will be booted
automatically after a timeout.
Use this option if you have multiple operating
system images installed.
Timeout
Specify the length of time, in seconds, that the main menu will be displayed before
the default boot option is started. This option is only displayed if autoboot is enabled.
10 seconds
Network options
There are three possible options for the system network interface:
DHCP on all active interfaces / DHCP on a specific interface /
Static IP configuration
 DHCP on all active interfaces:
Automatically assigns IP addresses to each network interface. Use this option if
you have a DHCP server on your network.
 DHCP on a specific interface:
Automatically assigns IP addresses to the selected network interface. The other
interfaces are not configured. Select this option if you have multiple DHCP
servers on different interfaces, but only want to configure a single interface
during boot.
 Static IP configuration:
Allows you to specify an IPv4 address and network mask, gateway and a DNS
server or servers for a network interface. Select this option if you do not have a
DHCP server, or want explicit control of network settings.
DNS Server(s)
Setup the DNS Server(s) IP address for your network interface.