manualshive.com logo in svg

TYAN TITAN TURBO PLUS ATX, Руководство пользователя

Поделиться
Скачать
TYAN TITAN TURBO PLUS ATX Скачать руководство пользователя страница 27

27

Power Management Setup

From within this menu, you can set or disable system power manage-
ment options.

PnP/PCI Configuration

Enter this sub-menu to modify the configuration of Plug and Play
standard and PCI BUS parameters.

Load BIOS Defaults

This item will load the BIOS defaults, which are the most stable
settings for each system parameter.

Load Setup Defaults

This item will load the Setup defaults, which are the optimal values for
the system parameters.

Integrated Peripherals

This option lets you enable or disable onboard devices. You can also
configure the I/O and IRQ settings of the onboard serial and parallel
ports.

Supervisor Password 

and 

User Password

Change, set, or disable a password with this function. It allows you to
limit access to the system and/or to Setup.

IDE HDD Auto Detection

The IDE HDD Auto Detection menu automatically configures your
hard disk parameters.

Save & Exit Setup

Saves changes to CMOS and exits setup.

Exit Without Saving

Abandons all CMOS changes and exits setup.

BIOS

Содержание TITAN TURBO PLUS ATX






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды