S1832DL Tiger 100
25
INST
ALL
Figure 2-11
Installing the CPU with Passive Cooling
The installation of the CPU with passive cooling differs only slightly from that of
the active. Your passive cooling package should contain one CPU retention
module, one heat sink retention bracket with mounting locks, two mounting
attachments, and one heat sink lock.Install the retention module as explained in
the previous section.
The heat sink mount (Figure 2-12) has
two pins on the bottom and four pins
on the top. Notice that the bottom two
pins are of different sizes. The size of
the pins and the holes in the mother-
board will determine the correct
orientation. When the bracket is
correctly installed, the four pins on top
will be right next to the Slot 1 connector.
Insert the heat sink mount into the holes on the motherboard. When the bracket
is properly inserted into the holes on the motherboard, you will hear a clicking
noise.
Figure 2-12
