TYAN THUNDER I7501 XTREME Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

background image

24

http://www.TYAN.com

Chapter 3: BIOS Setup

Installation

The BIOS is the basic input/output system, the firmware on the motherboard that enables your
hardware to interface with your software. This chapter describes different settings for the BIOS
that can be used to configure your system.

The BIOS section of this manual is subject to change without notice and is provided for reference
purposes only. The settings and configurations of the BIOS are current at the time of print, and
therefore may not match exactly what is displayed on screen.

This section describes the BIOS setup program. The setup program lets you modify basic
configuration settings. The settings are then stored in a dedicated, battery-backed memory (called
NVRAM) that retains the information when the power is turned off.

This motherboard’s BIOS is a customized version of the industry-standard BIOS for IBM PC AT -
compatible personal computers. The BIOS provides critical, low-level support for the system’s
central processing unit (CPU), memory, and I/O subsystems.

This BIOS has been customized by adding important features such as virus and password
protection, power management, and chipset “tuning” features that control the system. This section
will guide you through the process of configuring the BIOS for your system setup.

Starting Setup

The BIOS is immediately activated when you turn on the computer. The BIOS reads system
configuration in CMOS RAM and begins the process of checking out the system and configuring it
through the Power-On-Self-Test (POST).

When these preliminary tests are complete, the BIOS searches for an operating system on one of
the system’s data storage devices (hard drive, CD-ROM, etc). If one is found, the BIOS will launch
that operating system and hand control over to it. You can enter the BIOS setup by pressing the
[

Delete

] key when the machine boots up and begins to show the memory count.

«
...
22
23
24
25
26
...
»

Содержание THUNDER I7501 XTREME

















































Отзывы:

Нет отзывов

Похожие инструкции для THUNDER I7501 XTREME

Бренд: Supero Страницы: 105

Бренд: Intel Страницы: 76

Бренд: Linear Technology Страницы: 16

Бренд: Aaeon Страницы: 65

Бренд: Embest Страницы: 91

H470 AORUS PRO AX

Бренд: Gigabyte Страницы: 52

Бренд: Intel Страницы: 26

Spartan-7 SP701

Бренд: Xilinx Страницы: 4

Бренд: Atmel Страницы: 39

Бренд: Gigabyte Страницы: 37

Бренд: MATSONIC Страницы: 39

Бренд: Gigabyte Страницы: 64

Бренд: Biostar Страницы: 210

Бренд: CAME Страницы: 4

Бренд: Ublox Страницы: 22

BD7F100EFJ-EVK-002

Бренд: Rohm Страницы: 6

BD93F10MWV-EVK-001

Бренд: Rohm Страницы: 20

Бренд: Fujitsu Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды