Thunder HEsl S2567
23
About the AGP Pro slot
If you are planning to install an AGP Pro-compliant card, a small plastic retention piece must be removed
from the AGP Pro slot before the card can be installed.
First, make sure the card you’re installing is an AGP Pro-compliant card. Locate the small plastic retention
piece in the AGP Pro slot (
Figure 2.6a
, above), and use a tool with a small hard tip (such as a pen) to
remove the retention piece (
Figure 2.6b
, above).
Tyan recommends you save this piece for future
use (e.g. in case a regular AGP card is installed later on).
NOTE:
Only remove the small plastic retention piece if you are going to install an AGP
Pro-compliant card. Installing a regular AGP card without the retention piece can
cause the card to rock back and forth, possibly damaging the card and/or mother-
board.
Tyan takes no reponsibility and will not be held liable for damage related to use of
regular AGP cards without the retention piece installed.
1
2
Figure 2.6a
Figure 2.6b
INS
T
ALL
