TYAN THUNDER H2000M Скачать руководство пользователя | Manualshive

Страница: 96 / 96

background image

http://www.tyan.com

96

NOTE: A receipt or copy of your invoice marked with the date of purchase
is required before any warranty service can be rendered. You may obtain
service by calling the manufacturer for a Return Merchandise
Authorization (RMA) number. The RMA number should be prominently
displayed on the outside of the shipping carton and the package should
be mailed prepaid. TYAN will pay to have the board shipped back to you.

Notice for the USA

Compliance Information Statement (Declaration of
Conformity Procedure) DoC
FCC Part 15: This device complies with part 15 of the FCC
Rules

Operation is subject to the following conditions:

This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try one or more of the
following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Plug the equipment into an outlet on a circuit different from that of the receiver.
Consult the dealer on an experienced radio/television technician for help.

Notice for Canada
This apparatus complies with the Class B limits for radio interference as
specified in the Canadian Department of Communications Radio Interference
Regulations. (Cet appareil est conforme aux norms de Classe B d’interference
radio tel que specifie par le Ministere Canadien des Communications dans les
reglements d’ineteference radio.)

Notice for Europe (CE Mark)
This product is in conformity with the Council Directive
89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture, mutilate,
or dispose of battery in fire. Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by manufacturer.
Dispose of used battery according to manufacturer instructions and in
accordance with your local regulations.

Document #: D1913-100

«
...
94
95
96

Содержание THUNDER H2000M

































































































Отзывы:

Нет отзывов

Похожие инструкции для THUNDER H2000M

Бренд: IEI Technology Страницы: 177

Бренд: Actel Страницы: 2

Бренд: Analog Devices Страницы: 24

Бренд: JETWAY Страницы: 43

Бренд: Avalue Technology Страницы: 116

Бренд: Humandata Страницы: 8

Бренд: TOHATSU Страницы: 52

Бренд: Intel Страницы: 36

Бренд: SMSC Страницы: 4

Бренд: WinSystems Страницы: 16

CAES UT65CML8X8FD-EVB-UM

Бренд: COBHAM Страницы: 20

Бренд: Gigabyte Страницы: 108

Бренд: Pericom Страницы: 8

Бренд: NXP Semiconductors Страницы: 4

Бренд: Microchip Technology Страницы: 54

Бренд: JETWAY Страницы: 55

Бренд: ASROCK Страницы: 47

Бренд: Intel Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды