manualshive.com logo in svg

TYAN THUNDER 2400, Руководство пользователя

Поделиться
Скачать
TYAN THUNDER 2400 Скачать руководство пользователя страница 76

http://www.tyan.com

76

Chapter 3

BIOS Configuration

DMA Channel 

n

These options allow you to specify the bus type used by each DMA channel.

The settings are PnP or ISA/EISA .

IRQ

n

These options specify the bus that the specified IRQ line is used on. These

options allow you to reserve IRQs for legacy ISA adapter cards. These

options determine if AMIBIOS should remove an IRQ from the pool of

available IRQs passed to devices that are configurable by the system BIOS.

The available IRQ pool is determined by reading the ESCD NVRAM. If more

IRQs must be removed from the pool, you can use these options to reserve the

IRQ by assigning an ISA/EISA setting to it. Onboard I/O is configured by

AMIBIOS. All IRQs used by onboard I/O are configured as PCI/PnP. IRQ12

only appears if the Mouse Support option in Advanced Setup is set to

Disabled. IRQ14 and 15 will not be available if the onboard PCI IDE is enabled.

If all IRQs are set to ISA/EISA and IRQ14 and 15 are allocated to the onboard

PCI IDE, IRQ9 will still be available for PCI and PnP devices, because at least

one IRQ must be available for PCI and PnP devices. The settings are ISA/EISA

or PCI/PnP.

Reserved Memory Size  

This option specifies the size of the memory area reserved for legacy ISA

adapter cards. The settings are Disabled, 16K, 32K, or 64K.

Reserved Memory Address

This option specifies the beginning address (in hex) of the reserved memory

area. The specified ROM memory area is reserved for use by legacy ISA

adapter cards. This option does not appear if the Reserved Memory Size

option is set to Disabled. The settings are C0000, C4000, C8000, CC000, D0000,

D4000, D8000, or DC000.

Содержание THUNDER 2400










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды