TYAN Tempest i5400XL, Руководство пользователя

Страница: 32 / 81

http://www.tyan.com
32
PWR1: Main Power 24-Pin (Chipsets & Components)
24
12
1
1 3
12 +3.3V 24 GND
11 +12V3 23 +5V
10 +12V3 22 +5V
9 +5VSB 21 +5V
8 PWR OK 20 RESET
7 GND 19 GND
6 +5V 18 GND
5 GND 17 GND
4 +5V 16 PS_ON
3 GND 15 GND
2 +3.3V 14 -12V
1 +3.3V 13 +3.3V
PWRCPU: 8-pin (CPU Power)
1 5
8
4
4 GND 8 +12V2
3 GND 7 +12V2
2 GND 6 +12V1
1 GND 5 +12V1
PWR2: 4-pin (For PCI-E X16 slot4 and FAN3)
4 2
1
4 +12V1 2 GND
3 +12V1 1 GND
Applying power to the board
1. Connect the EPS 12V 8-pin power connector.
2. Connect the EPS 12V 24-pin power connector.
3. Connect the EPS 12V 4-pin power connector.
4. Connect power cable to power supply and power outlet
We suggest using a 700W or higher power supply; this is of course dependent
on how many devices you attach
. A 700W power is sufficient for systems
without many devices (i.e. 1 hard drive, 1 optical drive, and 1 or 2 expansion
cards) however a higher wattage solution may be needed if the system is fully
loaded. Refer to the
www.tyan.com website for further information.