TYAN Tempest i5400PW, Руководство пользователя

Страница: 62 / 80

http://www.tyan.com
62
3.5 Power
These settings allow you to configure the power options for your system.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Enable ACPI
ACPI Suspend Type
Resume on Time
Resume Time
Power Button Function
After Power Failure
[Yes]
[S3]
[Off]
[00:00:00]
[Power Off]
[Stay Off]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select

Sub-Menu F10 Previous Values
Enable ACPI
This allows you to enable or disable ACPI BIOS.
Options: No /
Yes
ACPI Suspend Type
This allows you to select one of the ACPI power states: S1, S2 or S3. If selected,
the corresponding power state will support.
Options:
S3 / S1/S3 / S1
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This time
is specified by the Resume Time parameter.
Options:
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
NOTE: This item is hidden when Resume On Time is set to [Off].
Power Button Function
This specifies the behavior of the system after the power button is pressed.
On/Off - This turns on / off the system after the power button is pressed.
Wake/Sleep - This wakes the system from/puts the system to sleep.
Options:
On/Off / Wake/Sleep
After Power Failure
Specifies the mode of operation after the system recovers from a power loss.
Options:
Stay off / Last State / Power on