background image

 

 

http://www.TYAN.com 

 

 

 

Tempest i5000PW 

/// 

S5382 

 

Revision 1.00

 

 

 

Copyright 

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of this manual 
may be reproduced or translated without prior written consent from TYAN Computer Corp. 
 

Trademark 

All registered and unregistered trademarks and company names contained in this manual 
are property of their respective owners including, but not limited to the following. 
 
TYAN, 

Tempest i5000PW

 are trademarks of TYAN Computer Corporation. 

Intel, Blackford, and combinations thereof are trademarks of Intel Corporation. 
PhoenixBIOS are trademarks of Phoenix Technologies. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE,is a trademark of SuSE AG. 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
 
 

Notice 

Information contained in this document is furnished by TYAN Computer Corporation and 
has been reviewed for accuracy and reliability prior to printing. TYAN assumes no liability 
whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of 
TYAN products including liability or warranties relating to fitness for a particular purpose or 
merchantability. TYAN retains the right to make changes to product descriptions and/or 
specifications at any time, without notice. In no event will TYAN be held liable for any direct 
or indirect, incidental or consequential damage, loss of use, loss of data or other malady 
resulting from errors or inaccuracies of information contained in this document.

 

 
 

Содержание TEMPEST I5000PW














































































Отзывы: