http://www.TYAN.com
43
3.2.3 Boot Features
This option allows setting boot parameters. Press Enter to view the Boot Features
screen.
PhoenixBIOS Setup Utility
Main
Advanced Power Boot Exit
Boot Features
Item Specific Help
Floppy check:
Summary screen:
Boot-time Diagnostic Screen:
QuickBoot Mode:
Extended Memory Testing
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Just zero it]
Enabled verifies floppy
type on boot; disabled
speeds boot.
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
←
→
Select Menu
Enter
Select
X
Sub-Menu
F10
Previous Values
Floppy Check
This feature is used to verify floppy type on boot. Selecting “Disabled” will speed the boot process.
Disabled
/ Enabled
Summary Screen
Enables or disables the display of the summary screen during boot up.
When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility summary
screen appears during system boot after the power-on self-test (POST). The summary
screen lists many of the system setup settings. When this option is set to Disabled, the
summary screen does not appear.
Enabled
/ Disabled
Boot-time Diagnostic Screen
This feature is used to display the diagnostic screen during the boot process.
Enabled
/ Disabled
Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the computer by
shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests and
shortening others. In addition, it will also perform as following to further speed up the
booting process:
z
Spin up the hard disks as soon as power is supplied (or as soon as possible)
z
Initialize only critical parts of the chipset
z
Read memory size from the SPD (Serial Presence Detect) chip on the memory
modules
z
Eliminate logo delays
