http://www.TYAN.com
35
3.3 - Setup Basics
The table below shows how to navigate in the setup program using the
keyboard.
Key
Function
<F1>
General help window
<ESC>
Exit current menu
arrow keys
Select a different menu
or
arrow keys
Move cursor up/down
<Tab> / <Shift-Tab>
Cycle cursor up/down
<Home> / <End>
Move cursor to top/bottom of the window
<PgUp> / <PgDn>
Move cursor to next/previous page
<->
Select the previous value/setting of the field
<+>
Select the next value/setting of the field
<F8>
Load Fail Safe default configuration values of the menu
<F9>
Load the Optimal default configuration values of the
menu
<F10>
Save and exit
<Enter>
Execute command or select submenu
3.4 - Getting Help
Pressing [
F1
] will display a small help window that describes the
appropriate keys to use and the possible selections for the highlighted
item. To exit the Help Window, press [
ESC
].
3.5 - In Case of Problems
If you have trouble booting your computer after making and saving the
changes with the BIOS setup program, you can restart the computer by
holding the power button down until the computer shuts off (usually within
4 seconds); resetting by pressing CTRL-ALT-DEL; or clearing the
CMOS.The best advice is to only alter settings that you thoroughly under-
stand. In particular, do not change settings in the Chipset section unless
you are absolutely sure of what you are doing. The Chipset defaults have
been carefully chosen either by TYAN
®
or your system manufacturer for
best performance and reliability. Even a seemingly small change to the
Chipset setup options may cause the system to become unstable or
unusable.
The following pages provide the details of BIOS menu. Please be noticed
that the BIOS menu are continually changing due to the BIOS updating.
The BIOS menu provided are the most updated when this manual is
written. Please visit TYAN
®
’s website at http://www.TYAN.com for the
information of BIOS updating.
Содержание S8225
