TYAN S7045, Руководство пользователя

Страница: 31 / 124

http://www.TYAN.com
31
J198 (JP10): BIOS Recovery Mode Jumper
Pin 1 2 3
Signal NC FM_BIOS_RCVR_BOOT_N GND
Pin 1-2 Closed: Normal (Default)
Pin 2-3 Closed: Recovery Mode
J205: SAS SMbus/SGPIO Header
Signal Pin Pin Signal
P3V3_AUX 1 2 SCL
GND 3 4 SDA
KEY 5 6 HD_ERROR_LED
J217: Patsburg Upgrade ROM Module Header
Pin 1 2 3
Signal GND FM_PBG_DYN_SKU_KEY GND
USB3: Vertical (Type A) USB Connectors
Pin 1 2 3 4
Signal VCC UDAT1- UDAT+ GND
CLEAR CMOS BTN: Clear CMOS Reset Button
Normal
(Default)
Clear CMOS
You can reset the CMOS settings by using this
button if you have forgotten your system/setup
password or need to clear system BIOS setting.
1.
Power off system and disconnect power
connectors from the motherboard
2. Press the button (Clear CMOS)
3. Reconnect power & power on system
NOTE: After flashing new BIOS please follow the
following steps:
a. Clear CMOS
b. Enter BIOS setup menu and load Default
Settings. Then do a Save and Exit from setup.