background image

 
 
 
 

    

 

 

 

 

S7045 

 

Version 1.0 

 

 

Copyright 

Copyright © MiTAC Computer Corporation, 2012. All rights reserved. No part of 
this manual may be reproduced or translated without prior written consent from 
MiTAC Computer Corp. 

 

Trademark 

All registered and unregistered trademarks and company names contained in 
this manual are property of their respective owners including, but not limited to 
the following. 

 

TYAN

®

 is a trademark of MiTAC Computer Corporation 

Intel

®

 is a trademark of Intel

®

 Corporation. 

AMI

®

, AMIBIOS

® 

and combinations thereof are trademarks of AMI Technologies. 

Microsoft

®

, Windows

®

 are trademarks of Microsoft Corporation. 

Aspeed

®

 is a trademark of Aspeed Technology Inc. 

 
 

Notice 

Information contained in this document is furnished by MiTAC Computer 
Corporation and has been reviewed for accuracy and reliability prior to printing. 
MiTAC assumes no liability whatsoever, and disclaims any express or implied 
warranty, relating to sale and/or use of TYAN

®

 products including liability or 

warranties relating to fitness for a particular purpose or merchantability. MiTAC 
retains the right to make changes to product descriptions and/or specifications 
at any time, without notice. In no event will MiTAC be held liable for any direct 
or indirect, incidental or consequential damage, loss of use, loss of data or other 
malady resulting from errors or inaccuracies of information contained in this 
document.

Содержание S7045





























































































































Отзывы: