TYAN S6623 Скачать руководство пользователя страница 50

Страница: 50 / 78

http://www.tyan.com

IDE Bus Master

This option enables or disables the IDE bus mastering capability under the DOS
environment.

Onboard IDE-1 Controller

This item enables or disables the onboard IDE-1 controller.

Onboard IDE-2 Controller

This item enables or disables the onboard IDE-2 controller.

OnChip Serial ATA Mode

This item allows you to select the mode for the On-Chip Serial ATA controller.

Options:

IDE

/ RAID

OnChip Serial ATA

This item determines the function for on-chip Serial ATA.

[Disabled]: Disable the Serial ATA controller.

[Auto]: Allows the Serial ATA controller to be arranged by BIOS automatically.

[Combined Mode]: Parallel ATA and Serial ATA are combined together.
Supports up to 4 IDE drives.

[Enhanced Mode]: Enable both Parallel ATA and Serial ATA. Supports up to 6
IDE drives.

Serial ATA 1 Mode / Serial ATA 2 Mode:

This item determines the function mode for SATA1 and SATA 2 Port. Both
SATA1 and SATA2 will be served each as one single IDE connector after
selected as the following modes:

Mode

Serial ATA
Port1
(SATA1)

Serial ATA
Port2
(SATA2)

Description

IDE-3 Master

IDE-4 Master

SATA1 serves as IDE-3 Master
SATA2 serves as IDE-4 Master
OnChip IDE-1 and IDE-2 controller enabled

Enhanced

IDE-4 Master

IDE-3 Master

SATA1 serves as IDE-4 Master
SATA2 serves as IDE-3 Master
OnChip IDE-1 and IDE-2 controller enabled

IDE-1 Master

IDE-1 Slave

SATA1 serves as IDE-1 Master
SATA2 serves as IDE-1 Slave

OnChip IDE-1 controller disabled

Combined

IDE-1 Slave

IDE-1 Master

SATA1 serves as IDE-1 Slave
SATA2 serves as IDE-1 Master

OnChip IDE-1 controller disabled

Содержание S6623















































































Результаты поиска

Содержание S6623

Отзывы:

Похожие инструкции для S6623

Бренды по названию

Популярные бренды

TYAN S6623, Руководство пользователя

Результаты поиска

Содержание S6623

Отзывы:

Похожие инструкции для S6623

Бренды по названию

Популярные бренды