TYAN S5556, Руководство пользователя

Страница: 20 / 134

http://www.tyan.com
20
J102: TPM Header
Signal Pin Pin Signal
P3V3 1 2 LPC_FRAME_N
LPC_LAD0 3 4 KEY
LPC_LAD1 5 6 PLTRST_N
LPC_LAD2 7 8 GND
LPC_LAD3 9 10 CLK
IRQ_SERIAL 11 12 GND
FM_TPM_MOD_PRES_N 13 14 P3V3_AUX
P3V3(NI)/GND 15 16 RST_ESPI_RESET_N
PWR_BTN1: System Power Button
Signal Pin Pin Signal
FP_PWR_BTN_N 1 2 FP_PWR_BTN_N
GND 3 4 GND
RST_BTN1: System Reset Button
Signal Pin Pin Signal
FP_RST_BTN_N 1 2 FP_RST_BTN_N
GND 3 4 GND
J33: Chassis Intrusion Header
Signal Pin Pin Signal
PCH_INTRUDER_N 1 2 GND
J12: Clear CMOS Jumper
Normal ( Default )
You can reset the CMOS settings by using this jumper. This can be
useful if you have forgotten your system/setup password, or need to
clear the system BIOS setting.
1. Power off system and disconnect power connectors from the
motherboard.
2. Remove the jumper from Pin_1 and Pin_2 (Default setting).
3. Move the jumper cap to close Pin_2 and Pin_3 for several seconds
to Clear CMOS.
4. Put jumper cap back to Pin_1 and Pin_2 (Default setting).
5. Reconnect power connectors to the motherboard and power on
system.
The system will power on for a few seconds, then shutdown and
reboot. This is a normal part of the CMOS clear process.
Clear CMOS