TYAN S5377, Руководство пользователя

Страница: 27 / 77

27
2.11 - Installing the Power Supply
There is one power connectors on your Tempest i5100T S5377. The Tempest
i5100T S5377 requires 1 power input.
- 18-pin (PW1)
NOTE : Please be aware that ATX 2.x, ATX12V and ATXGES power supplies
may not be compatible with the board and can damage the motherboard and/or
CPU(s).
PW1: 18-pin 12V/5V Power Connector
1
Pin Signal Pin Signal
1 +3.3V 10 +3.3V
2 COM 11 -12V
3 COM 12 COM
4 +5V
13
PS-ON#
5 5VSB
14
+5V
6 COM
15
PWR_OK
7 COM
16
COM
8 +12V1 17 COM
9 +12V2
18
+12V3
Applying power to the board
1. Connect the 12V/5V 8-pin power connector.
2. Connect power cable to power supply and power outlet.
NOTE
YOU MUST unplug the power supply before plugging the power
cables to motherboard connectors.
2.12 - Finishing up
Congratulations on making it this far! You’re finished setting up the
hardware aspect of your computer. Before closing up your chassis, make
sure that all cables and wires are connected properly, especially IDE cables
and most importantly, jumpers. You may have difficulty powering on your
system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find
help by asking your vendor for assistance. If they are not available for
assistance, please find setup information and documentation online at our
website or by
calling your vendor’s support line.