TYAN S5365, Руководство пользователя

Страница: 40 / 79

40
Please note that the BIOS will automatically reset it to the default setting of No
after reconfiguring the new ESCD. So, there is no need for you to manually
disable this feature after rebooting.
Yes / No
Large Disk Access Mode
This option determines whether a hard drive with more than 1024 cylinders,
more than 16 heads and or more than 64 tracks per sector is present on the
system. Set this option to
DOS if such a hard drive is present. Else, set this
option to Other . Virtually, all modern hard disks have these characters so leave
this option at DOS , unless you know otherwise.
DOS / Other
Parallel ATA
This feature is used to enable the PATA function.
Enabled / Disabled
Serial ATA
This feature is used to enable the SATA function.
Enabled / Disabled
Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.
Auto / Serial ATA
Hard Disk Pre-Delay
This feature is used to add a delay before the first access of a hard disk by the
BIOS. Some hard disks hang if accessed before they have initialized
themselves. This delay ensures the hard disk has initialized after power up,
prior to being accessed.
Disabled / 3 Seconds / 6 Seconds / 9 Seconds / 12 Seconds / 15
Seconds / 21 Seconds / 30 Seconds
Disable ACPI_Six
This feature is used to select one of the ACPI power status: S1, S2, or S3. If
selected, the corresponding power state will be disabled.
S3 / S1 / None