TYAN S5197, Руководство пользователя

Страница: 56 / 79

56
http://www.tyan.com
Options: Disabled / Enabled
FirstWare Authentication Level
This feature is used to select FirstWare Authentication Level.
Options:
High / Medium / Low
3.6 Power Menu
Use this screen to select options for the Power Settings Configuration.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Acpi Sleep Mode:
Resume on Time:
Resume Time:
Power Button Behavior
After Power Failure:
Chassis Intrusion Detect
S5 Wake-Up by PCI Card:
[S1/S3]
[Off]
[00:00:00]
[On/Off]
[Last State]
[No]
[Disabled]
Select one of the ACPI
power status: S1, S2 or
S3. If selected, the
corresponding power
state will support.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select
X Sub-Menu F10
Save and Exit
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This time
is specified by the Resume Time parameter.
Options:
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Power Button Behavior
This specifies the behavior of the system after the power button is pressed.
On/Off - This powers on / powers off the system after the power button is pressed.
Wake/Sleep - This wakes the system from/puts the system to sleep.
Options:
On/Off / Wake/Sleep
After Power Failure
Sets the mode of operation if an AC/Power Loss occurs. The two modes are:
[Enabled]: restores the previous power state before loss occurred.
[Disabled]: keeps the power off until the power button is pressed.
Options: Power On / Stay Off /
Last State
Chassis Intrusion Detect
This feature is used to enable/disable the function: when chassis open event is
detected, BIOS will record the event.
Options:
No / Yes