background image

http://www.tyan.com 

 

 

 

Toledo i3010W 

/// 

S5197 

      Version 1.00

 

 

 

Copyright 

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of this 
manual may be reproduced or translated without prior written consent from TYAN 
Computer Corp. 
 

Trademark 

All registered and unregistered trademarks and company names contained in this 
manual are property of their respective owners including, but not limited to the 
following. 
 
TYAN, Toledo i3010W are trademarks of TYAN Computer Corporation. 
Intel, Prescott, and combinations thereof are trademarks of Intel Corporation. 
Phoenix, Phoenix-Award BIOS are trademarks of Phoenix Technologies. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE, is a trademark of Novell. 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
 

Notice 

Information contained in this document is furnished by TYAN Computer Corporation 
and has been reviewed for accuracy and reliability prior to printing. TYAN assumes 
no liability whatsoever, and disclaims any express or implied warranty, relating to 
sale and/or use of TYAN products including liability or warranties relating to fitness 
for a particular purpose or merchantability. TYAN retains the right to make changes 
to product descriptions and/or specifications at any time, without notice. In no event 
will TYAN be held liable for any direct or indirect, incidental or consequential 
damage, loss of use, loss of data or other malady resulting from errors or 
inaccuracies of information contained in this document.

 

 

Содержание S5197
















































































Отзывы: