http://www.TYAN.com
54
IRQ3
Interrupt
IRQ4
Set the interrupt for serial port
B
Disabled
Parallel port
Enabled
Configure parallel port using
options.
378
Base I/O Address
278
Set the base I/O address for
parallel port.
IRQ5
Interrupt
IRQ7
Set the interrupt for parallel
port.
Output only
Mode
Bi-directional
Set the mode for parallel port
using options.
DMA 1
DMA channel
DMA 3
Set the DMA channel for
parallel port.
Disabled
Floppy disk controller
Enabled
Configure Floppy disk
controller using options.
Primary
Base I/O address
Secondary
Set the base I/O address for
parallel port.
3.4.7- Hardware Monitor Sub-Menu
You can use this screen to hardware monitor infomation. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of
the selected option.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
CPUx Temperature xxC
Sysx VRM temperature xxC
CPUx Fan Speed xxxxRPM
System Fan Speed xxxxRPM
CPUx VDD Voltage x.x V
+12V x.xV
+12V CPU Board x.xV
+5v x.xV
+5v CPU Board x.xV
+3.3V x.xV
AMD8131 Vcore x.xV
CK804 Vcore x.xV
F1: Help
↑↓
: Select Item -/+: Change Values F9: Setup Defaults
Esc: Exit
←
→
: Select Screen Enter: Select
Sub-Menu
F10: Previous Values
