TYAN S3850, Руководство пользователя

Страница: 59 / 71

http://www.tyan.com
59
Feature Option Description
Memory Configuration
Limit
Memclock Mode
Auto
MEMCLK can be set by the code
using AUTO, or if you use LIMIT,
you can set one of the standard
values.
Manual
MCT Timing Mode
Auto
Allows user to configure the MCT
Timing Mode manually.
Manual
User Config Mode
Auto
Allows user to set the User Config
Mode manually.
8 Beats
4 Beats
Burst Length
2 Beats
Burst length can be set to 8 or 4
beats. 64 bit DQ must use 4 beats.
Disabled
SoftWare Memory Hole
HardWare Memory Hole
Enabled
Allows user to enable software /
hardware memory remapping
around memory hole.
No Reduction
-15%
-30%
CPU1 Mem DQ Driver
Strength
CPU2 Mem DQ Driver
Strength
-50%
This field controls the drive strength
reduction of the Memory DQ pins.
3.9.1.2 –ECC Configuration Sub-Menu
This menu allows the user to configure ECC setup for system & DRAM. Use the up
and down arrow (
Ç
/
È
) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
ECC Configuration
DRAM ECC Enable
MCA DRAM ECC Logging
ECC Chip Kill
DRAM SCRUB REDIRECT DRAM
BG Scrub
L2 Cache BG Scrub
Data Cache BG Scrub
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
DRAM ECC allows
hardware to report and
correct memory errors
automatically
maintaining system
integrity.
← →
Select Screen
↑↓
Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit