9
http://www.TYAN.com
2.06 – Wake-On-LAN(WOL) (J10)
Plugging your LAN card cable into J10 enables the Wake-On-LAN feature. This
automatically resumes the system power when the LAN port receives an
incoming signal during power-saving mode.
2.07 – Wake-On-Ring(WOR) (J12)
Similarly to the Wake-On-LAN, plugging your modem into J12 enables the
Wake-On-Ring feature. This automatically resumes the system power when the
modem receives an incoming signal during power-saving mode.
2.08 – USB CONNECTOR (J16)
Pins grouped together:
1,2: VCC
3,4: USB +
5,6: USB –
7,8,10: GND
Pin 2
VCC
Pin 4
USB -
Pin 6
USB +
Pin 8
GND
Pin 10
GND
Pin 1
VCC
Pin 3
USB -
Pin 5
USB +
Pin 7
GND
2.09- COM2 CONNECTER (J24)
Pin 2
DSR
Pin 4
RTS
Pin 6
CTS
Pin 8
RI
Pin 1
DCD
Pin 3
RX
Pin 5
TX
Pin 7
DTR
Pin 9
GND
2.10- LAN2 LINK/ACTIVITY LED (J22)
1: 2:LANLED-
2.11- LAN1 LINK/ACTIVITY LED (J23)
1: 2:LANLED-
2.12- SM BUS (J21)
1:SMB CLK 2:SMB DAT
